Oki Microline 3390

Appendix A: Technical Data
A-3
Paper Specifications (see details in Appendix E)
number of copies Original + 3 copies, multi-part forms
Cut Sheets
width 182 - 216 mm (7.2 - 8.5 inches) narrow model
182 - 364 mm (7.2 - 14.3 inches) wide model
weight 45- 90 g/m
2
(12 - 24 lb)
Cut Sheets via Cut Sheet Feeder
width 182 - 216 mm (7.2 - 8.5 inches) narrow CSF
182 - 364 mm (7.2 - 14.3 inches) wide CSF
weight 60 - 90 g/m
2
(16 - 24 lb)
Sprocket Paper, single-part forms
width 76 - 254 mm (3 - 10 inches) narrow model
76 - 406 mm (3 - 16 inches) wide model
weight 45 - 90 g/m
2
(12 - 24 lb)
Sprocket Paper, multi-part forms, pressure sensitive
width 76 - 254 mm (3 - 10 inches) narrow model
76 - 406 mm (3 - 16 inches) wide model
thickness < 0.36 mm (< 0.014 inches), rear paper feed
< 0.44 mm (< 0.017 inches), bottom paper feed
weight 34 - 41 g/m
2
(9 - 11 lb)
Sprocket Paper, multi-part forms, carbon interleaf
width 76 - 254 mm (3 - 10 inches) narrow model
76 - 406 mm (3 - 16 inches) wide model
thickness < 0.36 mm (< 0.014 inches), rear paper feed
< 0.44 mm (< 0.017 inches), bottom paper feed
weight 38 - 45 g/m
2
(10 - 12 lb)
weight of carbon 34 g/m
2
(9 lb)
Printer weight 6.9 kg (narrow model)
8.9 kg (wide model)