Chapter 7: Accessories
7-3
Installing the
feed rail
3. Align the holes of the exten-
sion precisely to the holes of
the rail.
4. Fasten the screws once
again.
Extended in this way, the paper
feed rail will now fit the wide
printer. If, on the other hand,
you are using the narrow print-
er, the rail must not be extend-
ed.
Install the feed rail as follows:
Caution!
The print head moves and can cause injury to the hands.
Switch the printer OFF LINE and wait until the print head stops
moving.
Caution!
The print head may be hot and can burn your hands.
Wait until the print head has cooled down.
To Next Page
Loading...
