Chapter 5
Control Codes
This chapter describes your ML380's print command set. It's not just for
programmers; if you want to modify your software to add a
particular function, or if you want to embed extra commands in a
document, you'll find the necessary information here. Even if you
just use the front panel to control your printer, the explanations
of the features and how they work will be helpful.In this
chapter we give both the ASCII and the decimal equivalents for each
control code (command). For the hexadecimal equivalents, see the
control code table in Appendix C.
ML 380 ( 96-02-03 )
To Next Page
Loading...
