%Character Style
Character Style
Print Quality Control Codes
Use LQ print quality for letter quality printing in any of the six available typefaces. The FONT lights on the
front panel indicate which typeface is engaged. Enter the typeface command described below to choose
the typeface you wish to use.
Use utility print quality for drafts and other documents that you want to print quickly. In this mode, ML380
will print only the Letter Gothic typeface in 10, 12, 15, 17, or 20 cpi pitch. It will not print in any of the
other typefaces, nor will it print in the proportional spacing pitch. If you wish to select one of the other
typefaces or proportional spacing, you must first enter the ESC x 1 command to engage the LQ mode;
otherwise the printer will ignore the typeface or the proportional spacing command and continue to print in
the utility mode. All the FONT lights on the front panel are off
when ML380 is operating in the utility mode.
Note: You can also use the front panel controls of the Menu Select Mode to choose
print quality.Typeface
ML 380 ( 96-02-03 )
To Next Page
Loading...
Need help?
General