To Next Page
K
Kimberly RoachAug 26, 2025
What to do if there is no paper in the Oki ML1120?
- CcaseyriveraAug 27, 2025
If there is no paper in the Oki Printer, load paper into the printer.
What to do if there is no paper in the Oki ML1120?
If there is no paper in the Oki Printer, load paper into the printer.
What to do if the printer driver is not installed properly for Oki ML1120?
If the printer driver is not installed properly for your Oki Printer, reinstall the printer driver correctly.
What to do if Oki Printer cannot be resumed?
If printing cannot be resumed on your Oki Printer, turn the power OFF, verify that the carriage moves properly, then turn the power ON again.
What to do if my Oki ML1120 Printer has no power?
If your Oki printer has no power, first check that the power cable is properly connected to both the power outlet and the printer. If the connection is secure, plug another appliance into the same outlet to rule out a power outlet issue or outage.
Why is my Oki ML1120 Printer printing completely different characters?
If your Oki printer is printing incorrect characters or symbols, the issue might stem from an incorrect print setup for the user application. Reselect the print setup for the applications according to priority. It could also be that the application control codes from the previous print operation are still enabled; try initialising the printer. Verify the input application control signal is correct by printing in hex dump mode and making corrections in the application. Finally, ensure the interface cable is properly connected.
What to do if Oki Printer characters are too pale?
If the characters printed by your Oki printer are too pale, first ensure that the Paper Thickness lever position matches the paper type. If it is set correctly, check if the printer is set to print at high speed and set the speed to normal. If the issue persists, the ribbon may be at the end of its life or not installed correctly; try replacing or reinstalling the ribbon cartridge. The ribbon may also be wound incorrectly or not transferring properly, in which case, replace the ribbon cartridge.
What to do if Oki ML1120 prints content of a single form on two forms when using continuous forms?
If your Oki printer is printing the content of a single continuous form across two forms, ensure that the paper length selected in the application matches the physical paper length you are using.
What to do when Oki ML1120 Printer prints content of a single sheet on two sheets when using cut sheets?
If your Oki printer is printing the content of a single cut sheet across two sheets, match the paper setting selected in the application with the physical paper in use. Also, leave enough top and bottom margin in the application. Finally, correct the cut sheet LF adjustment.
Why is the horizontal printing position offset on my Oki ML1120?
If the horizontal printing position is offset on your Oki printer, it may be because the start position changed after the printer was powered on. When the printer is powered on, switch from off-line mode to on-line mode by pressing the SEL button to reset the start position. Remember to turn the power off before changing the start position.
How to fix Oki ML1120 when the print carriage does not operate?
If the print carriage on your Oki printer isn't operating, it might be due to contamination on the carriage shaft. Clean any paper dust and contamination from the carriage with a dry cloth.
General| Noise level | 49.7 dB |
|---|---|
| Maximum duty cycle | 18000 pages per month |
| Maximum number of copies | 9 copies |
| Power requirements | 120 - 220V |
| Dimensions (WxDxH) | 889 x 587 x 379 mm |
Weight and Dimensions| Dimensions (W x D x H) (imperial) | 35 x 23.1 x 14.9 \ |
|---|
Provides additional information to supplement the main text.
Provides additional information which, if ignored, may result in equipment malfunction or damage.
Provides additional information which, if ignored, may result in a risk of personal injury.
Explains the purpose and structure of the user's guide and related documents.
Instructions on how to read the guide on screen using Adobe Acrobat Reader.
Procedure for printing the whole manual, individual pages, or sections.
Advise to retain packing materials for future shipping or transport.
Identifies and explains the main parts of the printer, including front and rear views.
Details the buttons and indicators on the printer's control panel for operation.
Guidance on selecting a location and powering on the printer for the first time.
Procedure to print a test page to verify printer functionality.
Describes the available data interfaces for connecting the printer to a PC.
Steps for connecting the printer and computer, installing drivers, and printing a test page.
Step-by-step guide on how to load cut sheet paper into the printer.
Instructions on how to manually eject a cut sheet left in the printer.
Procedures for setting up and feeding continuous forms via rear and bottom feeds.
Instructions for tearing off and removing continuous forms from the printer.
Overview of control panels, buttons, and indicators for both ML1120 and ML1190 models.
Describes the specific functions of each button on the printer's control panel.
Instructions on how to change printer modes directly from the front panel.
Guides on setting, confirming, initializing, and viewing printer menu items and values.
Procedures for setting the Top of Form (TOF) position for optimal paper alignment.
Adjusting print speed modes (normal, high, quiet) and setting user-defined TOF positions.
Guides for clearing paper jams for both cut sheet and continuous forms.
Addresses alarm conditions, general problems, printing errors, and paper feed issues.
Instructions for cleaning the outside surfaces of the printer.
Guidance on cleaning the internal components of the printer safely.
Step-by-step instructions for replacing the printer's ribbon cartridge.
Lists consumables and their corresponding order numbers for purchasing.
Covers print method, speed, head, direction, LF/FF time, paper feed control, duplication.
Details character sets, media, ink, print head life, dimensions, weight, power rating, and consumption.
Specifies interfaces, dust/corrosion, operating/storage conditions, standard usage, and noise level.
Covers print method, speed, head, direction, LF/FF time, paper feed control, duplication for ML1190.
Details character sets, media, ink, print head life, dimensions, weight, power rating, and consumption for ML1190.
Specifies interfaces, conditions, usage, and noise level for ML1190.
Provides contact details for Oki Systems offices across various European countries.
