4-5
Receiving Faxes > Manual Reception
Manual Reception
This method allows you to receive faxes by pressing the [On hook] key after confirming that the telephone line has
connected to the sending system.
Flow of reception
You can confirm that the connection has been made before receiving a fax.
1
The machine receives a call.
When the machine receives a call, it rings.
2
Press the [On Hook] key.
Press [On Hook] to establish the connection.
3
Press [Manual RX].
Reception will start.
To use Manual Reception, you need to change the receiving mode to Manual Reception. To change to manual mode,
refer to RX Settings
on page 8-6.
Connecting a telephone set (commercially available product) to this machine enables you to receive originals after
talking to the person at the sending system.
To Next Page
Loading...
