4-8
Receiving Faxes > Fax reception settings
2 Press the [OK] key.
3 Press the [▲] or [▼] key to select the paper type you want to use for fax reception.
4 Press the [OK] key.
4
Set the paper type.
Configure paper settings for fax reception. When selecting the paper type, select the same paper type as
you selected in step 3.
For more information about configuring settings, refer to Reception on page 8-6.
RX Date/Time
Reception Date/Time function adds the reception date/time, sender information and number of pages on the top of each
page when the message is printed out. It is useful for confirming the time of reception if the fax is from a different time zone.
For more information about configuring settings, refer to Reception on page 8-6.
2 in 1 Printing
When you receive a multi-page Statement or A5 size original, this function prints 2 pages of the original at a time on one
Letter or A4 size sheet of paper. If you specify 2 in 1 reception and duplex printing at the same time, 2 in 1 reception is
disabled.
For more information about configuring settings, refer to Reception on page 8-6.
Batch Print
When a multi-page fax is received, the pages are printed in a batch after all pages are received.
For more information about configuring settings, refer to Default fax settings on page 8-2.
When the received data is printed on multiple pages, the reception date/time is printed on
the fist page only. It is not printed on the pages that follow. When the received fax data is
forwarded after retrieving it from memory, the reception date/time is not added to the
forwarded data.
On Print the reception date/time.
Off Do not print the reception date/time.
On Print 2 in 1.
Off Do not print 2 in 1.
On Print as a batch after all pages are received.
Off Print each page as it is received.
To Next Page
Loading...
