FAX Operation (Advanced)
OPERATION GUIDE 4-39
4
Program Dial
You can register transmission requirements such as the other party to which you send originals and
transmission time as a program. After registration, you can recall transmission requirements only by pressing
the program number. Also, you can assign names to programs to make recalling programs easier and more
convenient.
NOTE: The copy function can be also registered to the program. Up to 50 programs including copying and
sending functions can be registered.
When user login has been enabled, only the administrator can register.
Registering Programs
1 Transmission requirements have been registered,
press the Program key.
2 Press [Register].
3 Press the program number to be registered (1 to
50).
NOTE: When selecting a program number that has
been registered, you can replace the currently set
function with the function represented by the program
number.
4 Enter the program name, and press [Register]. The
program is registered.
NOTE: For details on character entry, refer to
Character Entry Method on page 2 of the Appendix.
Changing/Deleting Registration Contents
You can change program numbers and program names, or delete programs.
1 Press the Program key.
2 Press [Edit] and press the key of the program
number to be changed or deleted (1 to 50).
3 To change the program number, press [Change] of
Program No. Use [+]/[-] or the numeric keys to
change the program number, and press [OK].
To change the program name, press [Change] of
Program Name. Enter the program name, and
press [OK].
To Next Page
Loading...
Need help?
General