FAX Operation (Advanced)
4-2 OPERATION GUIDE
Long Originals
Use the optional document processor to scan long originals (originals that are longer in the paper feeding
direction).
NOTE: To send 2-sided originals, select [Off] (scan as standard size). (Refer to 1-sided / 2-sided Selection on
page 4-55.)
Originals of up to 1,600 mm/63" long can be scanned.
1 Press the Send/FAX key.
2 Place the originals in the optional document
processor.
3 Press [Original/Sending Data Format], and then
[Long Original].
4 To scan standard size originals, press [Off], and to
scan long originals, press [On].
5 Press [OK].
6 Set the destination, and press the Start key.
Transmission begins.
To Next Page
