FAX Operation (Advanced)
4-24 OPERATION GUIDE
23
To store the originals in the FAX Box, press [On]. If
you do not want to store the originals in the FAX
Box, select [Off], press [OK] and proceed to step
25.
NOTE: To set the FAX Box as the Forward
Destination, register the FAX Box in advance. For
details, refer to FAX Box Function on page 4-30.
24
Select the FAX Box to be used to store the originals
and press [OK].
25
You can change the following settings.
• Number of Copies
• Activating time setting
• File name registration
• Priority setting
NOTE: For details on above settings, refer to
Forwarding Detail Settings on page 4-26.
26
Press [Register]. The forwarding settings is
registered.
27
To register another forwarding settings, repeat
steps 4 to 26.
28
Select the checkbox beside the forwarding settings
to be enabled from the list. The checkbox beside
the forwarding setting to be enabled is checked.
NOTE: To disable the setting, press the checkbox to
delete the checkmark.
29
Press [OK] to save the settings by each
requirement.
To Next Page
