Olivetti SD-505 - Disassembly;Assembly;Cleaning List (Other Parts); Disassembly;Assembly Parts List; Cleaning Parts List; Disassembly;Assembly Procedure

Field Service Ver. 2.0 Jan. 2008 3. Other
5
SD-505Maintenance
3.2 Disassembly/Assembly/Cleaning list (other parts)
3.2.1 Disassembly/Assembly parts list
3.2.2 Cleaning parts list
3.3 Disassembly/Assembly procedure
3.3.1 Paper output tray/front cover
1. Align the cutout and remove the paper output tray [1].
2. Remove two screws [2], and remove the front cover [3].
No. Section Part name Ref. page
1
Exterior parts
Paper output tray P. 5
2 Front cover P. 5
3 Upper cover P. 6
4Rear cover P. 6
5
Units
Saddle unit P. 7
6 Crease unit P. 9
7 Stapler unit P. 1 1
8
Others
In & out guide drive motor P. 1 5
9 Crease roller P. 1 7
No. Section Part name Ref. page
1
Exit section
Transport section
Rollers and rolls P. 2 4
4511F2C500DA
[1]
[3]
[2]
Y108482-2 Service Manual