Olympus BH2 Series - Page 87

p
15-2-10 While operating the Lower Stage, adjust it
by turning Screw HU3xGSA. Then, clamp
I /HU3x6SA
Vertical Guide AB019200 firmly.
(See Fig. 1 5-9)
Fig. 15-9
NOTES:
The
Lower Stage must move smoothly,
without friction and play,
15-2-1 1 Apply Adhesive OT1028 at three or four
points on Vertical Guide AB019200 and
Upper Stage. {See Fig. 1 5-1 0)
15-2-1 2 Apply Shellac OT 1 1 31
to adjusting Screw
HU3xGSA and Screw AB3x8SA to prevent
them from loosening.
(See Fig.15-101
Fig. 15-1 0