Olympus BH2 Series - Disassemble Inner Ball Guide Unit

I-- 3-5-4 Sufficiently loosen two Screws AB3x 16SA
which are used to attach Guide Fixing Piece
(See Fig. 3-22.)
<<< .\>
1 3-5-5 Loosen four Screws AB3x12SA sufficiently.
(See Fig. 3-22.)
Fig. 3-22
---
3-6 'Disassemble Inner Ball Guide Unit ABOT4700 in
the sequence given below:
r .. 3-6-1 Extract the entire assembly of Inner Ball
. - -.
L ---
Guide unit in the direction indicated by arrow
in Fig. 3-23. (See Fig. 3-23.)
3-6-2 Remove sixteen Rollers AB022700, two
.-
-c
- Spacers AB023300, four Wires A8023400
--
3 and four Wires AB023500. (See Fig. 3-23,)
t
Fig. 3-23
3-6-3
Remove Guide Fixing Piece AB009700 and
Ball Guide AB024800. (See Fig. 3-24.)
3-6-4 Wash each part with gasoline or xylol.
After washing, wipe off gasoline or xylol
completely with a piece of dry cloth.
Fig. 3-24