Olympus BH2 Series - Disassembly Procedures - BH2-TR; BH2-TR Unit Disassembly

12. DISASSEMBLY PROCEDURE FOR BH2-TR
12-1 Disassemble BH2-TR into B2-TRC unit and B2-
BI unit,
For disassembly procedure, refer to T 0-1 -1 to
10-1-4.
Fig. '12-1
17 1 1 Detncl~ Cover AB033200 by removing two
Screws AB4x45SA and two Screws AB4x
--
"- -
--
-
I
25SA. (See Fig. 32-2)
12-2 Disassemble B2-TRC unit as per the following
procedures:
--, 1 1 2-2-1 Remove light path Selector Shaft A8034300.
I
I The Shaft is screwed in and fixed with a
I
small amount of Adhesive. Grasp the Shaft
with a rubber sheet or similar material and
I
I A8/1x25!
unscrew it.
Fig. 12-2
b
--
7 1 2-2-2 Dismount Dovetail AB033500 by removing
AB3x8SA
I four Screws AB3x8SA.
r-7 d
(See F iq. 12-31
Fig. 12-3