Olympus BH2 Series - Disassemble Stopper

c) Remove Nut AA782800 by using Tools
KC-2010 and KKAA7828.
{See Fig. 3- f 6.)
NOTE:
The Nut is fixed with Adhesive.
d) Extract Pinion Mount AB023600 in the
direction indicated by arrow in Fig. 3-16.
Balls B1/16 are removed together.
el R ernove Screw AA428500.
(See Fig. 3-16.)
NOTE:
Tbe Screw is fixed with Adhesive.
~~782800' K ~~~7828
Fig. 3-76
3-3-1 2 Disassemble right Coarse Adjustment Knob
3PUK 2.6 X 5SA
in the following sequence:
a) By removing three Screws 3PU K2.6x5SA,
detach Knob AB059400.
b) By removing Screws 3PUK2.6x5SA and
two Screws S K2.6x5SA, detach Plate
AA783000.
c) Remove gear assembly 23808800, ZA-
078200 and 2 A078300.
(See Fig, 3-1 7.)
I !
Fig. 3-17
3.4 Disassemble Stopper ZJ808500 as follows.
3m4.1
Remove Stopper Screw AAOOl 500.
3-4-2
Remove Knob AA785200 by turning it in the
direction indicated by arrow in Fig. 3-18,
fr $rn
-'-/ \; !
3-43 Remove R ing AA784100. (See Fig. 3-1 8.)
---\ AA784100
Fig. 3-18