Olympus BH2 Series - Adjustment of Mechanical Tube Length

KN0022
11-5 Adjustment of mechanical tube length
11-5-1
Adjust mechanical tube length of the right
side eyepiece sleeve
a) Use the following Jigs and BH2-BI Unit on
the Microscope Stand:
B2KC0406: lnterpupillary distance jig
Stage
Condenser
KN0007:
Standard objective
KN0022: Special WFlOx
C-15: Focusing magnifier
(See Fig. 11-1 5)
b) Set scale of KN0022 at 0, or red line.
(See Fig. 1 1-22)
c) Looking throu!lh thc C-15, move the front
lens portion
ill or oi~l until an object
1,000 mm away
froin the C-15 is brought
into focus. (See Fig. 11-16)
Fig. 11-15
d) Bring tlit! sl~c?cilirt:n of KN0007 into
focus l)y atijirsting longitudinal position
of Slunve AU032300.
e) WIIII rlie specimen in focus fix Sleeve
A136132300 and Inner Tube AB032600.
(1) Bond with Adhesive OT1027 at
Fig. 11 -1 6
utle point.
(3)Uotld with Adhesive OT1028 at
Il~tee points. (See Fig. 11-17)
f) Assemble. Circular Cover AB030700 in
~~osition.
Uo~id with Adhesive OT1028 at two
ot I hree points.
(See Fig. 11-17)
Fig. 11-17
-