Olympus BH2 Series - Disassemble the Condenser Holder

7-2 Disassemble the Condenser Holder in the follow-
ing procedures:
7-2-1 Remove Condenser Clamping Knob AB-
059600.
AA061400 7-2-2 Remove two Centering Knobs AB026000.
AB059600 1
7-2-3 Detach three Plates AB06'1400 by removing
six Screws 3PU K2x4SA.
(See Fig. 7-4.)
I
Fig. 7-4
'Fig. 7-5
7-2-4 Remove Condenser Mount AB059000.
(See Fig. 7-5.)
7-2-5
Dismount Rack AB026700 by removing two
Screws CU K2.6x6SA. (See Fig. 7-6.)
Two Washers SW2.6SA and two Washers
NW2.9-450BN are removed together with
the Rack.