Olympus BH2 Series - Assembly of Lateral Ball Guide Unit; Assembly Procedure for BH2-SV

15. ASSEMBLY PROCEDURE FOR BH2-SV
15-1 Assembly of Lateral Ball Guide Unit
15-1-1 Set up the Stage in a manner as shown in
Fig. 15-1. (See Fig. 15-1)
15-1 -2
Mount two Wire Guides A601 8900.
(See Fig. 15-13
Fig. 15-1
r- -
-
--?-- 15.1 3 Mounl Cnsinq ABOl88OO and eight Balls B3
Fig. 15-2
15-1-4 Place two Wire Guides ABOT9000 on Feed
Plate A601 8600 and mount them.
(See Fig. 15-3)
15-1 -5 Mount two Wire Guides AB019000.
1 5-1 -6
Mount Casing AB018800.
15-1 -7 Mount eight Balls I33 which are preliminarily
applied with Grease Of 2008.
(See Fig, 3 5-3)
Fig. 15-3