114
7
Settings
Setting the date and time in another time
zone (DUAL TIME SETUP)
This function allows you to set a date and time in another time zone (dual
time), separate from the settings in [X]. After setting, you can switch
between the new setting and the time set in [X].
Top menu [MODE MENU] [SETUP] [DUAL TIME SETUP]
g“Using the menus” (P. 17)
(Setting dual time
1 Select [ON], and press q.
2 Press sr to set the year, and
press q to move to the month
setting.
• To move back to the previous setting,
press p.
• The first two digits of the year are fixed.
• The date format is the same as that set
in Step 1 of [X].
3 Repeat this procedure until the
date and time are completely set.
• The time is displayed in the 24-hour format. Consequently, 2 p.m. is
displayed as 14:00.
4 Press Z.
• For a more accurate setting, press Z when the time signal hits 00 seconds.
• The date and time switches to dual time.
(Switching the date and time
1 Select [OFF] or [ON], and press Z.
OFF Switches to the date and time set in [X].
ON Switches to the date and time set in [DUAL TIME SETUP].
m/ft
ON
OFF
PIXEL MAPPING
CAM
SETUP
MEM
PIC
DUAL TIME
SETUP
2006
.
01
.
01
00
:
00
OK
DUAL TIME SETUP
SELECT
GOSET
To Next Page
Loading...
Need help?
General
