Focusing applications
55
4
Advanced shooting functions
If the subject cannot be accurately focused on with auto focus, set manual focus and
manually adjust the focus.
Top menu [MODE MENU] [CAMERA] [FOCUS MODE] [MF]
g“Using the menus” (P. 17)
1 Press sr to set the focus.
• During operation, the focus area is enlarged.
This lets you check whether the focus area
is correct.
• The distance indicator on the left of the
monitor is used for reference.
2 Hold down Z.
• The focus is locked at the distance you
have set, and MF is displayed in red on
the monitor.
• When Z is held down while MF is
displayed, the distance indicator is
displayed and the focus can be adjusted.
3 Take the picture.
• Set [FOCUS MODE] to [AF] to return to
auto focus.
Manual focus (FOCUS MODE)
TIPS
When you move the cursor to the top of the distance indicator, but the
camera cannot focus at ) (infinity).
j Press sr to make fine adjustments to the cursor position while viewing
the monitor.
Note
• Using the zoom lever after setting the focus may compromise the setting.
Perform the setting again.
44
50cm
1m
3m
1600
×
1200
SQ1
1/200
F4.0
0.0
441600
×
1200
SQ1
1/200
F4.0
0.0
To Next Page
Loading...
Need help?
General
