10-019116-01EN, Rev. 2, January 2021
Chapter 450
To avoid damage to the analyzer, comply with the instructions below:
• Do not touch or damage any internal components.
• Do not insert anything into the Vanta iX.
• Keep dust and foreign materials out of the Vanta iX.
• Make sure that your hands are clean.
• Position the Vanta iX so that any debris or loose screws will not fall into the
analyzer.
• Do not touch the measurement window film.
Table 7 Measurement window types
Material Image Vanta iX series Part number
Kapton
mesh/reinforced
prolene
ICW 10-011890-00
Prolene, 6µm IMR 10-015963-00
To Next Page
Loading...
