10-019116-01EN, Rev. 2, January 2021
Maintenance and Troubleshooting 57
5. While holding the faceplate in place, push down the front of the faceplate latch
over the faceplate catch, (Figure 4-11 on page 57).
Figure 4-11 Latch over faceplate catch
6. Push down the back of the latch to lock it.
4.2 Troubleshooting
This section proposes some possible solutions to problems you may experience
during operation of the Vanta iX (Table 8 on page 57). If these measures do not restore
the Vanta iX to full functionality, please contact Olympus After-Sales Service. When
contacting a service center, please provide the instrument model, serial number,
current software version, and a brief description of your issue.
Table 8 Troubleshooting guide
Problem Possible solutions
The Vanta iX does not turn
on.
Check the PoE+ power connection to the
Vanta iX.
To Next Page
Loading...
