Now you are ready to start your first measurement. Simply click in the home ribbon. As a result you
will see a first measurement comparable to the one shown in the figure below.
Figure 8-2: S-Parameter measurement of a 10.7 MHz IF filter
Trace 1 (red curve) shows the Magnitude of the Gain (= Magnitude of S21) while Trace 2 (blue curve)
shows the Magnitude of Reflection (= Magnitude of S11). You can change Format for both traces to
display other results such as Phase or Real and Imaginary components
Measurement types and applications
OMICRON Lab
47
To Next Page
Loading...
