Omicron Lab CT SB2 - USB Interface; Environmental Conditions; Climate

167
Technical Data
Figure 10-2 Connection cable for RS232 remote control interface
10.7.2 USB Interface
The USB interface can be used to connect the CT Analyzer to a computer.
Communication via USB is considerably faster than communication via RS232.
Figure 10-3 USB remote control interface (standard type B connector)
10.8 Environmental Conditions
10.8.1 Climate
Connections required:
12345678shield
12345678shield
9-pole (DB9) null modem or
crossover cable, 2 x female
USB interface
(type B connector)
Climate
Operating temperature –10 … +50°C (14 … 122°F)
Storage and transportation –25 … +70°C (–13 … 158°F)
Max. altitude 2000m
Humidity 5 … 95% relative humidity, non-condensing
Tested acc. to IEC 60068-2-78, Cab,
Damp Heat: Temp. 40°C, duration 48 h, rel.
humidity 95%