CT SB2 User Manual
16
2.3 CT SB2 Accessories (Scope of Delivery)
The following accessories are delivered with the CT SB2 switch box:
Accessories Description
1 x 6-pole cable Cable for connecting the
CT SB2 to the
CT Analyzer
1 x 12-pole cable,
7m (22ft)
Test cable for connecting
the secondary side of
the CT to the CT SB2
1 x 4-pole cable,
7m (22ft)
Test cable for connecting
the burden to the
CT SB2
1 x 9-pole SUB-D
cable, 0.3m (1ft)
Data connection cable
from the CTA interface
on the CT SB2 to the
remote control interface
on the CT Analyzer
12 x clamp Clamps in 6 different
colors according to the
12-pole test cable for
connecting the test cable
plugs to the tap
connections on the
secondary side of the CT
1 x Power cord
adapter
Using this adapter, only
one power supply cord is
required to supply the
CT Analyzer and the
CT SB2
To Next Page
Loading...
