35
CT Analyzer Test Cards for Multi-Ratio CT Testing
6 CT Analyzer Test Cards for Multi-Ratio CT
Testing
For multi-ratio CT testing using the CT SB2 switch box, the CT Analyzer
provides two additional test cards: MR-Config. and MR-Results.
These cards are only available if a multi-ratio CT test has been initialized by
selecting "New MR-Test" from the main menu of the CT Analyzer.
Depending on the selected standard, the behavior of the CT-Object card may
differ slightly from the normal single-ratio CT test mode without using the
CT SB2.
See section 6.1 on page 36.
See section 6.2 on page 38.
See section 6.3 on page 44.