Event name Locked by Password Event code 38A50000 hex
Meaning An incorrect user password was entered more than the specified number of times.
Source EtherCAT Master Function Mod-
ule
Source details Slave Detection tim-
ing
Continuously
Error attrib-
utes
Level Minor fault Recovery Error reset Log category System log
Effects User program Continues. Operation Motor stops.
Indicators EtherCAT NET RUN EtherCAT NET ERR EtherCAT LINK/ACT
--- --- ---
System-de-
fined varia-
bles
Variable Data type Name
None None None
Cause and
correction
Assumed cause Correction Prevention
(1) User password 1 or 2 was en-
tered more than the specified
number of times.
Reset the alarm.
→ T
urn OFF and then ON the
power supply to the inverter
again.
If you have forgotten your pass-
word
→ Set
Data Initialization
(3008-04 hex) to 1 and initialize
the parameters.
None
Attached in-
formation
None
Precautions/
Remarks
None
Appendices
A-276
M1 Series EtherCAT Type User’s Manual (I670)
To Next Page
Loading...
