Omron DST1-ID12SL-1 User Manual

73
Remote I/O Allocations Section 3-2
DST1-MD16SL-1
The default values for the I/O assembly data are as follows:
Safety connections:
Standard connection: The default values for each type of connection are
given below.
√√ Safety input assembly 5 311 Input 4 √√ √
√√ Safety input assembly 6 312 Input 4 √√ √√
√√ Standard output assembly 21 Output 1 √
√ General status assembly 300 Input 1 √
√ Test output status with gen-
eral status assembly
340 Input 2 √√
Safety connection
Standard connection
Network Configurator
setting
Assembly Instance No.
I/O size (bytes)
Inputs Outputs
Safety Input Data
Combined Safety Input Status
Individual Safety Input Status
Combined Safety Output Status
Individual Safety Output Status
Muting Lamp Status
Safety Output Monitors
Individual Test Output Status
General Status
Safety Output Data
Standard Output Data
Default (Assembly instance number)
IN Safety input assembly 1 (Instance No. 204)
OUT Safety output assembly 1 (Instance No. 234)
Connection Default (Assembly instance number)
Poll IN Safety input assembly 5 (No. 323)
OUT Standard output assembly (No. 21)
Bit strobe IN Safety input assembly 5 (No. 323)
OUT None
COS IN Output Monitor/Test Out status with General status
assembly (No. 341)
OUT None
Cyclic IN Output Monitor/Test Out status with General status
assembly (No. 341)
OUT None

Omron DST1-ID12SL-1 Specifications

General

Brand	Omron
Model	DST1-ID12SL-1
Category	I/O Systems
Language	English