Omron E5*C Series User Manual

6 Parameters
6 - 86
E5@C-T Digital Temperature Controllers User’s Manual (H185)
alfa
α 2-PID control must be set.
• Normally, use the default for this parameter.
• This parameter sets the 2-PID control a constant.
z Related Parameters
PID ON/OFF (Initial Setting Level): Page 6-63
tidu
Integral/Derivative Time Unit Control must be set to 2-PID control.
This parameter sets the time unit for the Integral Time, Integral Time (Cooling), Derivative
Time, and Derivative Time (Cooling) parameters.
Note:The Integral/Derivative Time Unit parameter changes to 0.1 when the RT (robust tuning)
parameter is changed from OFF to ON.
z Related Parameters
Integral Time and Derivative Time (Adjustment Level): Page 6-36
Derivative Time (Cooling) and Integral Time (Cooling) (Adjustment Level): Page 6-37
Function
Setting
Setting range Default
0.00 to 1.00 0.65
See
See
Function
Setting
Setting range Unit Default
1 to 0.1 Seconds 1
See
See

Omron E5*C Series Specifications

General

Brand	Omron
Model	E5*C Series
Category	Controller
Language	English