9
Introduction
The NS-Runtime Software provides the same functionality as an NS-series Programmable
Terminal to enable implementing FA onsite information displays and operations on Windows
XP, Vista, or 7. To enable using the NS-Runtime Software correctly, be sure you have
sufficient understanding of the CX-Designer and Programmable Terminal functions and
characteristics. Refer to all related manuals when using the NS-Runtime Software.
• Intended Audience
This manual is intended for the following personnel, who must also have knowledge of
electrical systems (an electrical engineer or the equivalent).
• Personnel in charge of introducing FA systems into production facilities.
• Personnel in charge of designing FA systems.
• Personnel in charge of installing and connecting FA systems.
• Personnel in charge of managing FA systems and facilities.
• Installation Environment
The NS-Runtime operates on an open platform, and usage conditions differ from those of
NS-series PTs.
• Never use the NS-Runtime for an FA system that operates 24 hours a day.
• OMRON disclaims responsible for any problems caused by using the NS-Runtime with
other software applications or any problems caused by the installation environment.
• It is the user's responsibility to isolate causes of any problems caused by other
software applications or by the installation environment.
To Next Page
Loading...
Need help?
General