Omron NS-RUNTIME - SOFTWARE - Screen Data Check

5-8 Screen Data Check
5-45
5-8 Screen Data Check
Registered screens (numbers 0 to 3,999) can be displayed and checked using operations
from the System Menu.
N
N
N
o
o
o
t
t
t
e
e
e
 The screen displayed when checking screen data is a sample and cannot be used to
communicate with the host. The flicker function is also disabled.
Display the DataCheck Screen by using the following procedure from the System Menu.
1. Click the Display Button next to the Data Check in the system menu. DataCheck Screen
will be displayed.
2. Set the screen number and click the Display Button. The screen will be displayed as a
sample on another screen.