Omron NS-RUNTIME - SOFTWARE - External Application; CX-Programmer; Switchbox Utility

5-5 External Application
5-12
5-5 External Application
This function is used to start up the CX-Programmer and the SwitchBox Utility.
This section describes methods for starting up external applications. For details on the
functions and operations of external applications, refer to the manuals for each application.
Item Function
CX-Programmer Starts up the CX-Programmer.
SwitchBox Utility Starts up the SwitchBox Utility.
5-5-1 CX-Programmer
1. Click the Launch Button next to the CX-Programmer.
If the CX-Programmer has not installed, the following dialog box below will be displayed.
Install the CX-Programmer.
5-5-2 SwitchBox Utility
1. Click the Launch Button next to the SwitchBox Utility to launch the SwitchBox Utility.
If the SwitchBox Utility has not installed, the following dialog box below will be displayed.
Install the SwitchBox Utility.