3-2 System Settings
3-7
3-2-3 History Tab Page
Specifying a folder to save history data with an NS-Runtime project.
Select History Tab.
1
2
No Item Description
1 Save destination of
history data
Specify a folder to save Operation Log, Alarm History, Data Log
and Error Log.
Specify a folder of up to 160 characters.
2 Set the save cycle for
Internal Holding
Memory
Deselect this option to save when the NS-Runtime ends.
Select this option to save $HB/$HW status and each history data at
a specified interval.
Set the Save Cycle to between one second to 24 hours 0 second 0
minute.
No need to set the Save Cycle in a normal situation but set this
when there is a possibility of not ending the NS-Runtime
environment normally.
To Next Page
Loading...
Need help?
General