3-1 Creating Projects
3-3
3-1-2 Project Property settings
Regarding the Project Property Dialog Box (PT Menu– Project Properties Menu), the
following settings are different from those of the NS Series.
With the NS-Runtime the Pop-Up Menu is displayed in MS Sans Serif (when the system
language is any language other than Japanese) or MS P Gothic (when the system language
is Japanese).
The relationships between font size settings with the CX-Designer and font sizes used with
the NS-Runtime are as follows.
Font size set with the CX-Designer Font size displayed on the NS-Runtime
1 x 1
1 x 2
16 pt
2 x 1
2 x 2
24 pt
3 x 3 36 pt
4 x 4 60 pt
8 x 8 96 pt
Delimiter is not shown. Therefore, there is no setting for the delimiter in the Pop-up Menu Tab
Page.
Font size (pt) corresponding to the scale
set with the CX- Designer will be shown
on the NS-Runtime.
No setting
Other setting items are the same as those for the NS Series. For details on each item, refer
to the System Settings and Project Properties in the CX-Designer Online Help.
To Next Page
Loading...
Need help?
General