5-6 Initialization/Setting Screen
5-36
No Item Function
3 Timeout (min)
When the Timeout Option is set to ON, this setting specifies the
timeout time in minutes (1 to 60 minutes).
4 Switch screen
when canceling
authentication.
Click the ON or OFF Button to specify whether the screen is
automatically switched to a specified screen when authentication is
canceled.
This option can be set when the password with levels function has
been turned ON.
ON The screen is switched to the specified Switch Screen No. when
authentication is canceled.
OFF The screen is not switched when authentication is canceled.
5 Switch Screen
No.
If the switch screen when authentication is canceled has been turned
ON, the screen is changed to the screen number set here when
authentication is canceled.
2. After setting, click the Write Button to save the setting. (For details on the write button,
refer to Writing on page 5-29.)
3. To change the password, click the Password Button.
N
N
N
o
o
o
t
t
t
e
e
e
When changing passwords, do not end the NS-Runtime until the write operation has been
completed (until a write completion message is displayed). If the password is not saved
properly, the screen may malfunction.
The password settings can also be made from the CX-Designer.
If the password is forgotten, it cannot be checked from the NS-Runtime. Check the
password using the CX-Designer.
To Next Page
Loading...
Need help?
General