Omron NX-SID Series User Manual

Units That Support Communications between NX Units
This section describes how to set up communications between the NX Units of the EtherNet/IP Slave
Terminals.
l
Digital I/O Units
The table below shows the NX Unit models that support communications between the NX Units as
well as the combinations of the Unit version and Sysmac Studio version.
Model Unit version Sysmac Studio
NX-ID3317 Ver. 1.0 Ver. 1.10 or higher
NX-ID3343 Ver. 1.0 Ver. 1.10 or higher
NX-ID3344 Ver. 1.0 Ver. 1.10 or higher
NX-ID3417 Ver. 1.0 Ver. 1.10 or higher
NX-ID3443 Ver. 1.0 Ver. 1.10 or higher
NX-ID4342 Ver. 1.0 Ver. 1.10 or higher
NX-ID4442 Ver. 1.0 Ver. 1.10 or higher
NX-ID5142-1 Ver. 1.0 Ver. 1.22 or higher
NX-ID5142-5 Ver. 1.0 Ver. 1.10 or higher
NX-ID5342 Ver. 1.0 Ver. 1.10 or higher
NX-ID5442 Ver. 1.0 Ver. 1.10 or higher
NX-ID6142-5 Ver. 1.0 Ver. 1.10 or higher
NX-ID6142-6 Ver. 1.0 Ver. 1.22 or higher
NX-IA3117 Ver. 1.0 Ver. 1.10 or higher
NX-OD3121 Ver. 1.0 Ver. 1.10 or higher
NX-OD3153 Ver. 1.0 Ver. 1.10 or higher
NX-OD3256 Ver. 1.0 Ver. 1.10 or higher
NX-OD3257 Ver. 1.0 Ver. 1.10 or higher
NX-OD3268 Ver. 1.0 Ver. 1.22 or higher
NX-OD4121 Ver. 1.0 Ver. 1.10 or higher
NX-OD4256 Ver. 1.0 Ver. 1.10 or higher
NX-OD5121 Ver. 1.0 Ver. 1.22 or higher
NX-OD5121-1 Ver. 1.0 Ver. 1.22 or higher
NX-OD5121-5 Ver. 1.0 Ver. 1.10 or higher
NX-OD5256 Ver. 1.0 Ver. 1.10 or higher
NX-OD5256-1 Ver. 1.0 Ver. 1.22 or higher
NX-OD5256-5 Ver. 1.0 Ver. 1.10 or higher
NX-OD6121-5 Ver. 1.0 Ver. 1.10 or higher
NX-OD6121-6 Ver. 1.0 Ver. 1.22 or higher
NX-OD6256-5 Ver. 1.0 Ver. 1.10 or higher
NX-OC2633 Ver. 1.0 Ver. 1.10 or higher
NX-OC2733 Ver. 1.0 Ver. 1.10 or higher
NX-OC4633 Ver. 1.0 Ver. 1.22 or higher
NX-MD6121-5 Ver. 1.0 Ver. 1.10 or higher
NX-MD6121-6 Ver. 1.0 Ver. 1.22 or higher
NX-MD6256-5 Ver. 1.0 Ver. 1.10 or higher
The data types in the following table are supported for communications between NX Units.
Appendices
A - 107
NX-series Safety Control Unit User's Manual (Z930)
A-17 Version Information
A
A-17-1 Relationship between Unit Versions and Sysmac Studio Versions

Omron NX-SID Series Specifications

General

Brand	Omron
Model	NX-SID Series
Category	Controller
Language	English