Omron R88D-1SAN-ECT Series - Page 32

32
5.
Set the parameters on the Axis Parameter Settings Tab Page.
The following figure shows the axis parameters for the unit conversion settings.
Unit of display: pulse
Command pulse count per motor rotation: 1,048,576 pulse/rev
Work travel distance per motor rotation: 1,048,576 pulse/rev
6.
Operation Settings
Maximum velocity: 52,428,800 pulse/s (3,000 r/min)
Maximum jog velocity: 1,048,576 pulse/s (60 r/min)
7.
Position Count Settings
Count mode: Linear mode