Omron R88D-1SAN-ECT Series User Manual

31
2.
Right-click Axis0 (axis 0) in the Multiview Explorer and select Edit from the menu.
The Axis Basic Settings view is displayed on the Axis Parameter Settings Tab Page in
the Edit Pane.
3.
Select Servo axis for the Axis type setting.
4.
Select the Servo Drive to use for the Output device 1 setting.
This will assign the node: 1 Servo Drive to the Output device 1 for axis 0.

Omron R88D-1SAN-ECT Series Specifications

General

Brand	Omron
Model	R88D-1SAN-ECT Series
Category	Controller
Language	English