Omron R88D-1SAN-ECT Series -  Setting to Transfer Data from the Standard Controller to the Safety Controller

34
4.
Drag a safety digital input device to the location where you want to add it in the
CPU and Expansion Racks Tab Page.
In this example, drag the NX-SID800 Safety Input Unit.
5.
Drag a digital input device to the location where you want to add it in the CPU and
Expansion Racks Tab Page.
In this example, drag the NX-ID4342 Digital Input Unit.
6.
Turn ON the power supply to all devices.
◼ Setting to Transfer Data from the Standard Controller to the Safety Controller
1.
Select new_SafetyCPU0 from the list.
2.
Double-click Exposed Variables.