Omron R88D-1SAN-ECT Series User Manual

36
◼ Setting the Safety Controller
This section describes how to set safety input devices.
1.
Select new_SafetyCPU0 from the list.
2.
Double-click Parameters.
3.
Drag a safety-door switch to the desired I/O terminal.
4.
Drag two safety key selector switches for single channel to the desired I/O
terminals.

Omron R88D-1SAN-ECT Series Specifications

General

Brand	Omron
Model	R88D-1SAN-ECT Series
Category	Controller
Language	English