Omron R88D-1SAN-ECT Series -  Setting the Safety Controller

63
◼ Setting the Safety Controller
1.
Select new_SafetyCPU0 from the list.
2.
Double-click SRA Parameters and click the Safety Function Assignment Settings
Button.
3.
Assign STO, SS2 instance1, and SOS instance1.
4.
Button or the Button to display the SS2 Detailed Settings
Click the
view.
Clear the selection of the
Active Check Box.
SS2 command1
Active cannot be
selected for No. 2
SS2 instance1.
Select SS2 instance1 to assign SS2
command1 Active.