Omron R88D-1SAN-ECT Series - Page 9

9
Manual name
Cat. No.
Model
Application
Description
NJ-series CPU Unit
Hardware User’s Manual
W500
NJ501-□□□□
NJ301-□□□□
NJ101-□□□□
Learning the basic
specifications of the
NJ-series CPU Units,
including introductory
information, designing,
installation, and
maintenance. Mainly
hardware information is
provided.
Provides an introduction to the entire
NJ-series system along with the
following information on the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NJ/NX-series CPU Unit
Software User’s Manual
W501
NX701-□□□□
NX102-□□□□
NX1P2-□□□□
NJ501-□□□□
NJ301-□□□□
NJ101-□□□□
Learning how to program and
set up an NJ/NX-series CPU
Unit. Mainly software
information is provided.
Provides the following information on a
Controller built with an NJ/NX-series
CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Language specifications and
programming based on IEC 61131-3
NJ/NX-series CPU Unit
Motion Control User's
Manual
W507
NX701-□□□□
NX102-□□□□
NX1P2-□□□□
NJ501-□□□□
NJ301-□□□□
NJ101-□□□□
Learning about motion
control settings and
programming concepts.
Describes the settings and operation of
the CPU Unit and programming
concepts for motion control.
NJ/NX-series
Instructions Reference
Manual
W502
NX701-□□□□
NX102-□□□□
NX1P2-□□□□
NJ501-□□□□
NJ301-□□□□
NJ101-□□□□
Learning detailed
specifications on the basic
instructions of an NJ/ NX
CPU Unit.
Describes the instructions in the
instruction set (IEC 61131-3
specifications).
NJ/NX-series
Motion Control Instructions
Reference Manual
W508
NX701-□□□□
NX102-□□□□
NX1P2-□□□□
NJ501-□□□□
NJ301-□□□□
NJ101-□□□□
Learning about the
specifications of the motion
control instructions that are
provided by OMRON.
Describes the motion control
instructions.
NJ/NX-series
Troubleshooting Manual
W503
NX701-□□□□
NX102-□□□□
NX1P2-□□□□
NJ501-□□□□
NJ301-□□□□
NJ101-□□□□
Learning about the errors that
may be detected in an
NJ/NX-series Controller.
Describes concepts on managing errors
that may be detected in an NJ/NX-series
Controller and information on individual
errors.
NX-series
Safety Control Units
User's Manual
Z930
NX-SL□□□□
NX-SI□□□□
NX-SO□□□□
Learning how to use the
NX-series Safety Control
Units.
Describes the hardware, setup methods
and functions of the NX-series Safety
Control Units.