9 Details on Servo Parameter Objects
9-32
G5-series AC Servomotors and Servo Drives User’s Manual (with Built-in EtherCAT Communications)
• Set the function and logic for general-purpose input 6 (IN6).
• Refer to the Details of Control Inputs in Control Input Details on page 3-21, as well as 7-1 Sequence
I/O Signals on page 7-2.
• Set the function and logic for general-purpose input 7 (IN7).
• Refer to the Details of Control Inputs in Control Input Details on page 3-21, as well as 7-1 Sequence
I/O Signals on page 7-2.
• Set the function and logic for general-purpose input 8 (IN8).
• Refer to the Details of Control Inputs in Control Input Details on page 3-21, as well as 7-1 Sequence
I/O Signals on page 7-2.
• Set the function assignment for general-purpose output 1 (OUTM1).
• Refer to the Details of Control Inputs in Control Output Details on page 3-24, as well as 7-1
Sequence I/O Signals on page 7-2.
• Set the function assignment for general-purpose output 2 (OUTM2).
• Refer to the Details of Control Inputs in Control Output Details on page 3-24, as well as 7-1
Sequence I/O Signals on page 7-2.
3405 hex
Input Signal Selection 6
Setting range 0 to 00FF
FFFF hex
Unit − Default setting 0021 2121 hex Data attribute C
Size 4 bytes (INT32) Access RW PDO map Not possible.
3406 hex
Input Signal Selection 7
Setting range 0 to 00FF
FFFF hex
Unit − Default setting 0020 2020 hex Data attribute C
Size 4 bytes (INT32) Access RW PDO map Not possible.
3407 hex
Input Signal Selection 8
Setting range 0 to 00FF
FFFF hex
Unit − Default setting 002E 2E2E hex Data attribute C
Size 4 bytes (INT32) Access RW PDO map Not possible.
3410 hex
Output Signal Selection 1
Setting range 0 to 00FF
FFFF hex
Unit − Default setting 0003 0303 hex Data attribute C
Size 4 bytes (INT32) Access RW PDO map Not possible.
3411 hex
Output Signal Selection 2
Setting range 0 to 00FF
FFFF hex
Unit − Default setting 0002 0202 hex Data attribute C
Size 4 bytes (INT32) Access RW PDO map Not possible.
All
All
All
All
All
To Next Page
Loading...
