108
Operation Command Section 6-8
(2) Response Codes
Note Includes execution within 15 seconds after the last reset switch request.
Response
code
Error name Cause Error
priority
1001 Command too long The command is too long. 1
1002 Command too short The command is too short. 2
1100 Parameter error Command code and related
information are wrong.
Bit is ON for a non-existent
branch output.
3
2203 Operation error Processing could not be per-
formed. (See note.)
4
0000 Normal completion No error 0
To Next Page
Loading...
Need help?
General
