Omron S8AS User Manual

104
Read Controller Status Section 6-6
(3) Response Code
6-6 Read Controller Status
This service reads the operating status and error status.
■ Service Request PDU
■ Service Response PDU
(1) Operating Status
(2) Related Information
Response
code
Error name Cause Error priority
1001 Command too long The command is too long. 1
0000 Normal completion No error 0
MRC SRC
0 6 0 1
2 2
MRC SRC
0 6 0 1
2 2 4 2
Response Code
Operating
Status
Related Information
20
0: Connected; 1: Cut off
The connection status is shown for each output,
regardless of the cause of the cutoff.
Branch output 1
Branch output 2
Branch output 3
Branch output 4
Branch output 5
Branch output 6
Branch output 7
Branch out
p
ut 8
Leading 4 bytes
0: Event occurred; 1: Event did not occur.
Power supply error (ALP
)
Abnormal voltage trip
Total current error
Cut off by tripping trigger
0 (Not used)
Reserved
Undervoltage alarm
0 (Not used)
Reserved
Remaining life alarm
Overheating alarm
0 (Not used)
Temperature alarm
0 (Not used)
0 (Not used)
Hardware error

Omron S8AS Specifications

General

Brand	Omron
Model	S8AS
Category	Power Supply
Language	English