9.3 Replacement of Cooling Fan
160
750 W SERVOPACKs
1. Remove the front cover of the
SERVOPACK.
• Press the tip of a flathead
screwdriver against each of the
notches on the SERVO-
PACK to dislodge the hooks.
• Insert the tip of a flathead
screwdriver into the notches
on the SERVOPACK one at a
time and pry the front cover off.
2. Open the case of the SERVO-
PACK.
Insert the tip of a flathead screw-
driver into the two notches on the
SERVOPACK one at a time and
pry the hooks loose.
3. Remove the case.
Lift up to pull the case of the SER-
VOPACK off.
A
B
A
A
B
B
Front cover
Case
TOEP_C710806_03A_1_0.book Seite 160 Montag, 2. Juli 2007 3:55 15
To Next Page
Loading...
