No.19S185-01
56/68
STC-MBE132POE / STC-MCE132POE
Product Specifications and User’s Guide
Name Description
DeviceLinkSpeed
[DeviceLinkSelector]
Indicates the speed of transmission negotiated on the specified Link.
DeviceLinkHeartbeatTimeout
[DeviceLinkSelector]
Controls the current heartbeat timeout of the specific Link.
DeviceLinkCommandTimeout
[DeviceLinkSelector]
Indicates the command timeout of the specified Link.
DeviceStreamChannelCount Indicates the number of streaming channels supported by the device.
DeviceStreamChannelSelector Selects the stream channel to control.
DeviceStreamChannelType
[DeviceStreamChannelSelector]
Reports the type of the stream channel.
DeviceStreamChannelEndianness
[DeviceStreamChannelSelector]
Endianness of multi-byte pixel data for this stream.
DeviceEventChannelCount Indicates the number of event channels supported by the device.
DeviceCharacterSet Character set used by the strings of the device's bootstrap registers.
DeviceReset Resets the device to its power up state.
DeviceRegistersStreamingStart Prepare the device for registers streaming without checking for
consistency.
DeviceRegistersStreamingEnd Announce the end of registers streaming.
DeviceRegistersEndianness Endianness of the registers of the device.
DeviceTemperatureSelector Selects the location within the device, where the temperature will be
measured.
DeviceTemperature
[DeviceTemperatureSelector]
Device temperature in degrees Celsius (C).
TimestampReset Resets the current value of the device timestamp counter.
TimestampLatch Latches the current timestamp counter into Timestamp Latch Value.
TimestampLatchValue Returns the latched value of the timestamp counter.
DeviceUserMemory Read / Write the user data from / to the non-volatile memory.
To Next Page
Loading...
Need help?
General
