Omron SYSDRIVE 3G3EV SERIES User Manual

"
 Data Display and Action to be Taken when Inverter Error
Occurs
The first character of an error codeis always “F” when an Inverter error occurs. (Howev-
er, all indicators are not lit when a control circuit error occurs.)
IfanInverter erroroccurs,turn thepoweroff,thenon.If the problempersists,replacethe
Unit.
Data
display
Description Action

Initial memory error
•
Turn the power off, then on.
I
f
t
h
e
p
r
o
b
l
e
m
p
e
r
s
i
s
t
s
r
e
p
l
a
c
e
t
h
e

ROM error
•
If the problem persists, replace the
Unit.

Constant error
•
Write down all the constant settings,
initialize the constants, and reset the
constants.
•
Turn the power off, then on.
•
If the problem persists, replace the
Unit.

Option error
The Digital Operator has an error or
faulty contact.
•
Turn the power off, then reinstall the
Digital Operator.
•
If the problem persists, replace the
Unit.
(Not lit)
Control circuit error
An error occurred in the control power
supply or hardware.
•
Check the power cables.
•
Replace the Unit.

Chapter 5

Omron SYSDRIVE 3G3EV SERIES Specifications

General

Brand	Omron
Model	SYSDRIVE 3G3EV SERIES
Category	Inverter
Language	English