1-6
Appearance FunctionName
Mode Key Switches the setting and monitor item indicators
in sequence.
Parameter being set will be canceled if this key is
pressed before entering the setting.
Increment Key Increases multi-function monitor numbers,
parameter numbers, and parameter set values.
Decrement Key Decreases multi-function monitor numbers,
parameter numbers, and parameter set values.
Enter Key Enters multi-function monitor numbers,
parameter numbers, and internal data values
after they are set or changed.
RUN Key Starts the Inverter running when the 3G3FV is in
operation with the Digital Operator.
STOP/RESET Key Stops the Inverter unless parameter n06 is not
set to disable the STOP Key.
Overview Chapter
1
To Next Page
Loading...
