To Next Page
T
Travis MooreSep 9, 2025
How to reduce noise from Omron SYSDRIVE 3G3JV Inverter switching?
- JJacob DavisSep 9, 2025
If noise derives from Inverter switching on your Omron Inverter, lower the carrier frequency of the Inverter in n46.
How to reduce noise from Omron SYSDRIVE 3G3JV Inverter switching?
If noise derives from Inverter switching on your Omron Inverter, lower the carrier frequency of the Inverter in n46.
What to do if leakage current flows through Omron SYSDRIVE 3G3JV Inverter?
If leakage current flows through the Inverter, use a ground fault interrupter with a high leakage-current detection value.
How to resolve resonance between mechanical system and carrier frequency on Omron Inverter?
If there is resonance between the characteristic frequency of the mechanical system and the carrier frequency on your Omron Inverter, adjust the carrier frequency value in n46.
How to increase startup DC injection control time on Omron SYSDRIVE 3G3JV Inverter?
Increase the parameter in n54 for startup DC injection control time on your Omron Inverter.
What to do if Omron SYSDRIVE 3G3JV Digital Operator does not display anything?
Turn the Omron Inverter off and on. If the Digital Operator still does not display anything, the internal circuitry of the Inverter must have failed. Replace the Inverter.
General| Model | SYSDRIVE 3G3JV Series |
|---|---|
| Category | Inverter |
| Output Frequency Range | 0.1 to 400Hz |
| Frequency Range | 50/60Hz |
| Control Method | PWM Control |
| Overload Capacity | 150% for 1 minute |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat |
| Cooling Method | Fan Cooling |
| Ambient Temperature | -10 to 50°C |
| Operating Temperature | -10 to 50°C |
| Storage Temperature | -20°C to +65°C |
| Humidity | 90% RH or less (non-condensing) |
| Altitude | 1000m or less |
| Vibration | 5.9 m/s² or less |
| Braking Unit | Built-in |
| Communication | RS-485 |
| Voltage Class | 200V class, 400V class |
| Input Voltage | 3-phase 200 to 240V AC, 3-phase 380 to 480V AC |
